top of page
Walnut Stain & Seal - 200ml
Artisan Stain & Seal is a one step stain and sealer. It is water-based and water-resistant and can be used to stain and seal raw timber, refresh precoated timber or even as a glaze over painted finishes. VOC free and virtually odourless, Stain & Seal can be applied with a damp sponge, brush or short nap roller.
  • Depth of colour can be increased with additional layers.
  • Different effects can be achieved by layering different shades of Stain & Seal.
 

Walnut Stain & Seal - 200ml

SKU: Walnut-200
$31.00Price
  • We recommend sanding and cleaning with Easy Scrub to ensure that the surface is clean and free from dirt, wax, oil, or flaking paint. 
    Apply with a sponge, working well into the grain and then finishing in long strokes with the grain. Surface may be lightly misted with water to ensure smooth coverage.
    Normal drying time is 20-30 minutes, and the surface can be recoated after 2-hours. Sand with 400+ grit sandpaper between coats for a silky smooth finish. Leave to cure for seven days for best results.
    To use as a glaze: apply to carved detail, pushing well into detail and wipe away excess using a damp cloth.
    Coverage: Approximately 6–10 square metres per litre, depending on application technique and surface roughness
bottom of page