Décor Weave - Blush - 59x88.6 cm

The prepared furniture piece:

• Wipe down with a wet cloth to remove all the dust.
• It is vitally important to remove all excess dust before applying any Hokus Pokus Décor-Weave to your project.
• Sharp pieces of wood dust, no matter how small, can spoil the surface and texture of your Décor-Weave project.
• All painted surfaces must be 100% dry to avoid the Hokus Pokus Décor-Weave from lifting or creating air bubbles.
• Always plan beforehand where you are going to place your Hokus Pokus Décor-Weave and cut to size, if needed.

Applying the Décor-Weave:

• Apply a base coat of a good quality polyurethane water-based sealer and while still wet place the Décor-Weave in the desired place.  Ensure all air bubbles are removed by rolling with a brayer.
• Wait about 30min then apply a 1st coat of sealer over the Hokus Pokus Décor-Weave,
• Wait until 100% dry then apply a 2nd coat and 3rd coat, ensure the surface is completely dry as per manufacturer’s instructions – don’t rush this phase.
• Once 100% dried and cured, gently sand the whole design with 400 grit sandpaper to a smooth texture. Clean with a wet cloth.

non refundable

Pick up from my Christchurch show room, or I can ship elsewhere in NZ